CONFIDENTIALITY AGREEMENT MW COCO1 (I) Mr. 6th April 2008[1]
THIS AGREEMENT IS “COPYRIGHT” MADE ON 6th APRIL 2008
BETWEEN
MAURICE WARD OF [WARD-OFF PLC [MW] [1]
AND
IN PERSON [ ] [2]
REPRESENTED IN PERSON. But also in context referred to herein as The Company.
WHOSE OFFICE IS SITUATED at
WHEREAS:-, “COPYRIGHTS PROTECTED AS EXPRESSED AND AS ENGROSSED’’
[A] MW has developed and is further developing ‘’STARLITE’’ and “ULTRA HIGHTECH STARLITE’’ “THE TECHNOLOGIES” with Techniques, Formulations and know-how for the manufacture of fire barriers, flux heat and thermal barriers interalia with properties [with composite and artifacts, ballistics and repeated high impingement]; when formulated together in Compositions of Halogen free components are toxicity free both in the manufacturing process and in service life [with no {‘’leaching’’ of ‘’toxins’’}which are poisonous substances]; and, in a fire situation with low smoke release and emissions; and ‘’BECAUSE OF’’ for their part thereby reducing and preventing excessive smoke inhalation and toxicity poisoning which are normally created in a fire situation; [Such Technologies, 89 such Techniques Formulation, and know-how, Formulated together in Compositions in part and / or in full] being hereafter called “THE INVENTIONS”. As set forth and more fully described in APPENDIX A
[F] In order to assist TG in considering “THE INVENTIONS” and a possible Joint Venture and or a marketing Agreement involving a license to sell products based on the Composition of “THE INVENTIONS”, MW is prepared to carry out certain demonstrations on material provided by the Company [“DEMONSTRATION MATERIALS”]. As set forth in APPENDIX A [F-1].
[G] The parties for their mutual benefit may have exchanged and wish further to exchange certain information of a confidential nature and wish to protect such information in the manner set out in this agreement
NOW IT IS HEREBY AGREED as follows:-
1. The property and all rights and title in the “DEMONSTRATION MATERIALS” shall transfer from [ ] to MW at the time the “DEMONSTRATION MATERIALS” are brought or delivered to MW’s for the preparation and purposes of the aforesaid demonstrations[2]
2. The Company may make a video film of the aforesaid DEMONSTRATION test procedures which film shall be the property of MW and may not be further copied or distributed save that the Company shall be entitled to retain one copy for the purpose of evaluating the Compositions of “THE INVENTIONS” for the said marketing arrangements
.
[1]
[2] CONFIDENTIALITY AGREEMENT C0CO1(I) Dated 6th April 2008
APPENDIX A.
[B] MW has developed and is further developing interalia Composites and Artifacts for Aircraft Safety which includes “THE INVENTIONS” [TESTS at BAe Systems, and METAIR 1989.1990.1991 ATS1.000.Smoke Release and Toxicity certification.
McDonnell Douglas Corporation and Boeing USA: 1996/1997/1998/1999/2000/2001/2002]
[C] MW has developed and is further developing “STARLITE CAMAR-B-RHI Composites and Artifacts to monopolize an Absorbent Resistance with Efficacy with efficiency against Ballistics and repeated High Impingement. Interalia may include” THE INVENTIONS”
[In 1991 TESTS were conducted with MOD.DRA; AT WHITE SANDS Missiles Range, NEW MEXICO; with NUCLEAR WEAPONS EFFECTS; SIMULATED NUCLEAR FLASH AND EXPLOSION.
And further TESTING WITH BALLISTICS AT CAVENDISH LAB CAMBRIDGE,
[D]MW has developed and is further developing “STARLITE NFAARrrr” {Nuclear Flash Absorber Arrester Resister reflectors} which interalia is a special Plasma producer” which is a “THERMAL insulator” and an extremely low radar signature, which may include “THE INVENTIONS” [TESTS A.W.E. UK] and [By George Johnston AT BOEING MILITARY, HUNTINGTON BEACH.CA] Dr Alan Atkins and Dr.John Davies and at Phantom Works St Louis 1997/1998/1999/2000/2001/2002.
[E] MW has developed and is continuing to further develop “STARLITE LPAARrrr” {Laser Pulse Absorber Arrester Resister reflectors-*15 Nano sec pulse 10Hz. Continuous} Which Interalia produces a self immunizing, and insulating Special Plasma, with a reflecting scatter; and which may be of an extremely low radar and millimetric signatures; with resistance to UV, infra red and solar temperatures; may also include “THE INVENTIONS” [TESTS via SDIPO LONDON at RSRE and DRA FARNBOROUGH. Also with THERMAL CONDUCTIVITY IN THE CAVENDISH LAB CAMBRIDGE UNIVERSITY FEBRUARY/JULY 93; WITH LUMONICS DEC 93] [BBC Film]
Boeing: McDonnell Douglas, Phantom Works, St Louis, USA [Joint Strike Fighter] and [at Phantom Works Huntington Beach: Air Force One 98, and Comanche Helicopter] 1996/1997/1998/ including; CO2 laser 3750 watts w/sq.cm per sec. continuous for six minutes duration. No penetration on ONE Millimeter thick of Starlite. THIS Equates to the “Q” value of 2470. Also the YAG laser 3.6GW cm/sq. per sec
Results produced with Scanned Cone calorimeter 1998/1999/2000/2001/2002 with heat capacities; with Dr John Kirby and Steve Amundsen at Phantom Works, Huntington Beach.CA.
Boeing values 0.4
Starlite values 5.0
Further tests carried out in the USA in 1996/1997/1998/1999/2000/2001 proved and certified that “THE STARLITE’’, and ‘’ULTRA HIGHTECH STARLITE’’ TECHNOLOGIES” have established certificate of a “Q” Value of 2470. [The shuttle tiles have a “Q” value of only ONE at 75mm thick]
In December 2001. At the laboratories of MDC/ Boeing, Phantom Works, St.Louis. USA Certified protection against fuselage burn through for 15 mins in civil aircraft was demonstrated and tested positive. This was certified by the Boeing Engineers team lead by Dr. Allen Atkins VP. Technologies
The “INSULFAB” by DuPont’ the material which was reported as being the key factor with a composite of the DuPont “Kapton Cabling” in the composite which started the fire and being the cause for the Swiss Airways CRASH over Nova Scotia”
Whilst a separate test proved that “THE STARLITE’’ and ULTRA HIGHTECH STARLITE’’ ‘’TECHNOLOGIES TREATED” “insulfab” ”As an aircraft lining” THIS did not ignite and did not burn at all. A DVD of the test and results are available.
In the UK, Demonstration Tests were simulated for FIRE DOORS during Aug 2003 and March 2004 this proved a “ONE HOUR PLUS “protection as sustainable.
A new “Lightweight” “Starlite Fire Door”(c) and TM is in design concept”
November 2006 Halogen Free Starlite Fire Door
‘’A Prototype’’: manufactured lightweight Timber and MDF composite ‘’HF Starlite Fire Door’’ was subjected to severe conditions of fire test with BS476+++ This was also subjected to stress factors for integrity; on the 7th November 2006 these severe tests including the stress factors proved 90 minutes FIRE PROTECTION with temperatures up to 1325.o.c [and, which are grossly in excess of the required test parameters] and, with the integrity to be sustainable.
Thermal Barriers
The inside of the Furness being at a profile temperature ranging from 850.o.c to 1325.o.c. The outside of the door was only up to > 43.o.c @ 60 mins== and 45.o.c. at 90 mins. The ‘’DELTA T’’.. Recorded 807’’ at 60 mins and 1280 up to 90 mins.
There was NO Warping, bending or twisting, or delaminating during the test; and in particular between the door and frame spaces which remained sealed with the special ‘’STARLITE SEAL EXPANSION’’.
THE Energy calculated that 3.9 million BTU’s was consumed during the test.
This was produced by using 46 Cubic Meters of Gas; is that 46 tonnes of Gas?
Currently looking @ Foam spray, possibly including for the tackling of the Californian fires.
[F1] MW will arrange to carry out demonstrations under his control and management on the “STARLITE” and ‘’ULTRA HIGHTECH STARLITE’’ “DEMONSTRATION MATERIAL” at an agreed facility or location and fee.
[10a]This agreement shall be governed exclusively by English Law and the parties submit to the exclusive jurisdiction of the English Courts as witness the respective hands of Maurice Ward and of…Mr. . The day and date in the year first before written.
[11]Maurice Ward………………………………………................…………………
In the presence of:-………………………………………………...................……..
[11a] Mr. ….......................................................................
In the presence of………………………………....................................................
CONFIDENTIALITY AGREEMENT MWCOCO1 6th April 2008
Sunday, 29 March 2009
Subscribe to:
Post Comments (Atom)
The idea of incorporating this technology into some type of fire extinguishing product is excellent, There is currently a great new product caleed Arctic Fire Freeze(AFF) that is just starting to enter the private sectors, it is currently being used for war fighters in Iraq and they have suppression systems in HumV's, and soldiers can apply it directly on their skin to prevent burns. If their was some type of way to combine the two technologies that could be amazing. AFF works on class AB&D fires and it has super cooling technology in it that brings even your hot metals quickly back to ambient temperatures. I do not know if you have found the Starlite product to be able to cool a severely hot item but with its heat resistance qualities it could really enhance this existing technology.
ReplyDeleteMr. Ward,
ReplyDeleteI am sure this has already come up but the opportunity should even be greater now with the new changes in the global economy and with the global warming worries out there and a lot of it based on our dependency on carbon fuels. Have you looked into using your product in the automotive industry? With this technology it could be incorporated into a light weight engine to run the new future vehicles that are all going to be required to put out less emmisions and better fuel economy, this product would help both problems, the weight savings alone will accomplish better fuel economy and less emmisions. I am sure this has already come up, and this has appeal in a wide market sector, auto's, RV's, Boats, Motorcycles, ATV's, Snowmobiles, Etc., Etc. With the US investing so much money on its stimulus package, I know there would be a lot of money that could be applied for to make this happen, and it not only accomplishes the goal of getting a more efficient vehicle on the road, it would help to create a lot of new jobs, the entire engine could be made out of light weight but durable materials coated or mixed with your product, this would be awesome.
I am a freelance consultant chemist and I have been working on these types of formulations for many years. I can confidently state that I can replicate this material and improve on the tensile properties (i.e. impact resistance) which are rather lacking in this material. Any interested parties can contact me on 0034 617868858 or Email: williamscomplex@gmail.com. All enquiries welcomed.
ReplyDeleteHello
ReplyDeleteWell! Surprised that this material is still generating so much interest. I have designed many similar formulations to this material and indeed some are actually currently under review for use as nanocomposites. These materials are certainly not difficult to produce providing that one has sufficient knowledge of fire resistant products.
If anyone has a query RE: fire resistant type coatings, then I would be happy to answer it. You can contact me at; timwhelton.kenwright@gmail.com
Thank you
I hope Mr Ward sees this.
ReplyDeleteMay I please point out that nothing stops an inventor giving license to more than one corporation or company. If you sell outright the rights to an invention or give exclusive production licensing to a single company they might do what Edison did to Tesla.
He bought the rights to Tesla's clean and free electricity and buried it. [If only we can find that].
Thanks to Edison we have a polluted world. Tesla died broke and heartbroken. Traditionally inventors do not become rich. Those who usurp inventions do so.
This comment has been removed by the author.
ReplyDeletecheers,
ReplyDeletestill thinking of you, hope you are well.
...welcome to visit Montreal.